HP LC3700N User Manual
Page 90
80
HP Pavilion LCD HDTV User’s Guide
Viewing questions
Picture quality questions
Remote control questions
Symptom
Remedy
I get a poor picture with video signal input.
Check the following: Improper control setting. Local interference.
Cable interconnections. Adjust picture control as needed. Try
another location for the TV. Be sure that all connections are secure.
I get a poor picture with DVI signal input.
Check the following: Improper control setting. Incorrect pin
connections on the connector. Adjust picture controls as needed.
Nothing appears on the screen, and I have
an external device controlling the TV.
■
Press the Input button on the remote control and confirm the
source is selected.
■
Verify that the external device or PC power is turned on.
■
Check to see whether the source component is connected.
■
Check the power management function. Is it in standby mode?
■
Connect the source to the TV. Operate the external device or PC
(move the mouse, or press a key).
Symptom
Remedy
Part of my picture is cut off, or the
picture is not centered.
Check the position adjustment settings, and adjust the screen settings
accordingly.
My picture image is too large or
too small.
Press the Aspect button on the remote control, and adjust properly.
My picture is unstable.
Verify that the external device or PC resolution setting is correct. Adjust to
the appropriate resolution.
There are bright spots on my LCD
screen.
In some cases, an LCD panel may have pixels that do not operate
properly. This is common to all LCD displays used in products supplied by
all vendors and is not specific to this product.
Symptom
Remedy
The remote control does not work.
Check the following, and try the proposed solution:
■
Press the TV button to control the TV.
■
Batteries are inserted with polarity aligned.
■
Make sure the remote control batteries are fresh. If they are worn out,
replace the batteries with three (3) new AAA alkaline batteries.
■
Make sure the remote control is within correct operating range.
■
Make sure the remote sensor window is not under too much light, direct
sunlight, or strong artificial light.
■
Make sure there are no obstacles; check that there is nothing between
the remote control and the sensor window on the display.