HP INSIGHT DYNAMICS T8671-91017 - Manual (Page 40)

MESSAGES
The following message may be displayed when running managed system configuration checks
on a 64–bit Windows managed system:
'chcp' is not recognized as an internal or external command,
operable program or batch file.
This is an issue with the remote command execution facility of HP SIM. The message can be
ignored.
FILES
Configuration settings, including communication port settings, are read from the following file:
HP-UX:
/etc/opt/mx/config/globalsettings.props
Windows: install-path\config\globalsettings.props
Detailed results of the checks performed by vseassist are written to the log file. Examine the
log file for recommended steps to resolve any problems found.
Note: The log file is not automatically pruned.
HP-UX:
/var/adm/syslog/vseassist.log
Windows: install-path\logs\vseassist.log
Linux: /var/log/vseassist.log
The default install-path on a Windows CMS is C:\Program Files\HP\Virtual Server
Environment
, but this directory can be changed at installation time.
SEE ALSO
Insight Dynamics help
Insight Dynamics information library (http://www.hp.com/go/insightdynamics/docs)
capcollect(1M), mxexec(1M), mxnode(1M), mxquery(1M), vseinitconfig(1M), vselicense(1M),
wbemassist(1M)
40 Command reference