Harbor Freight Tools 98871 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. SKU 98871
S
AFE
ty
S
ER
VI
c
E
B
ASI
c W
EL
d
Ing
W
EL
d
Ing
tIPS
S
E
t
UP
do not abuse the cord. never use d.
the cord for carrying, pulling or
unplugging the welder. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a welder outdoors, e.
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a welder in a damp f.
location is unavoidable, use a ground
Fault circuit Interrupter (gFcI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
Personal safety 3.
Stay alert, watch what you are a.
doing and use common sense when
operating a welder. do not use a
welder while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating welders may result in
serious personal injury.
Use safety equipment. b. Always wear
ANSI-approved safety glasses and arc
shaded, impact safety full face shield.
Safety equipment such as NIOSH-
approved respirator, heavy-duty work
gloves, non-skid safety shoes, or
hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure c.
the switch is in the off-position
before connecting to power source
or moving the welder. Carrying or
energizing welders that have the switch
on invites accidents.
do not overreach. Keep proper d.
footing and balance at all times. This
enables better control of the welder in
unexpected situations.
Only use safety equipment that has e.
been approved by an appropriate
standards agency. Unapproved safety
equipment may not provide adequate
protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the specific
hazards in the work area.
Welder use and care 4.
do not use the welder if the switch a.
does not turn it on and off. Any welder
that cannot be controlled with the switch
is dangerous and must be repaired.
disconnect the plug from the b.
power source before making any
adjustments, changing accessories,
or storing welders. Such preventive
safety measures reduce the risk of
starting the welder accidentally.
Store idle welders out of the reach c.
of children and do not allow persons
unfamiliar with the welder or these
instructions to operate the welder.
Welders are dangerous in the hands of
untrained users.
Maintain welders. check for d.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
welder’s operation. If damaged,
have the welder repaired before use.
Many accidents are caused by poorly
maintained welders.
Use the welder and accessories in e.
accordance with these instructions,
taking into account the working
conditions and the work to be
performed. Use of the welder for
operations different from those intended
could result in a hazardous situation.