Hotpoint HDA489 - Manual (Page 5)

- Cycle selection hints
It is important to follow the loading
instructions in the Loading Section.
NORMAL WASH—For most
RINSE & HOLD—For rinsing
loads of everyday dishes, glasses partial loads which will be washed
and cookware with medium soils. later. Select DRYING HEAT OFF.
WATER SAVER—For dishes with
Do not use detergent.
light that have not dried on, or WARMER—For
that have extra preparation before warming clean dishes and serving
loading. It saves water and energy. plates for the serving of hot food.
What happens in each cycle
●
You’ll hear occasional clicking
sounds:
●
During the drying period:
—Soft food disposer shredding —The motor stops during drying.
action.
—Water vapor comes through the
—Drain valve opening to pump vent during drying and when
water out. water is being pumped out.
—Timer control as cycle
progresses.
—Detergent cup opening.
Wash
Water Use Cycle Time
Wash Gallons
minutes)
Cycle Sequence
NORMAL WASH
SAVER 8.7 46
RINSE & HOLD 4.9 14
Options:
DRYING HEAT ON. Available on wash cycles except RINSE& HOLD. Add 29 minutes to wash
time.
DRYING HEAT OFF. Drying heater is turned off. Dishes dry naturally.
5