Health O Meter 7632 - Manual (Page 15)

15
15
3. Every new press of the “M” button recalls one set of prior stored values.
The most recent memory readings will be recalled first.
Clearing Values from Memory
1. Press the “User-Selection” button to select Memory Zone 1
or Memory Zone 2.
2. Continue to press the “M” button for approximately 5 seconds, then the data
in the selected memory zone will be erased automatically.
Press the “M” button for
5 seconds to clear all memory
Note: The data in both Memory Zones (Zone 1 and Zone 2) will be erased if one or
both batteries are removed from the battery compartment. (Please remember to record
your previous readings [from both zones] into your Blood Pressure Log prior to
replacing the batteries.) You can also erase the memories stored in both zones
by pressing the memory recall key for more than 5 seconds.