HP R507 - Manual (Page 67)

Chapter 2: Taking Pictures and Recording Video Clips 67
The new setting remains in effect until it is changed again or
until the camera is turned off. The Sharpness setting resets to
the default Medium setting when you turn the camera off.
Holding down the Menu/OK button when you turn the camera
back on will restore this setting to what it was when you turned
it off.
Date & Time Imprint
NOTE This setting does not apply in Panorama mode or when
recording video clips.
This setting imprints either the date or the date and time of
when the image was captured in the lower left-hand corner of
the image. Once you select either of the Date & Time Imprint
settings, the date or date and time will be imprinted on all
subsequent still images that are captured, not to previously
captured images.
NOTE Once you have taken a picture using either the Date
Only or Date & Time setting, the date or date and time
that is imprinted on the image cannot be removed later.
NOTE If you rotate the image using the Rotate option in the
Playback Menu (page 75), the date or date and time
imprint will likewise rotate with the image.
1 In the Capture Menu (page 50),
select Date & Time Imprint .
2 In the Date & Time Imprint sub-
menu, use the buttons to
highlight a setting.
3 Press Menu/OK to save the
setting and return to the Capture
Menu .