Husqvarna 324RX-Series - Manual (Page 27)

English – 27
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
324Rx
Engine
Cylinder displacement, cm
3
25,0
Cylinder bore, mm 35
Stroke, mm 26
Idle speed, rpm 3100
Recommended max. fast idle speed, rpm 11000
Speed of output shaft, rpm 8300
Max. engine output, acc. to ISO 8893, kW/ rpm 0,8 / 7000
Catalytic converter muffler No
Speed-regulated ignition system No
Ignition system
Manufacturer/type of ignition system Ikeda
Spark plug NGK CMR5H
Electrode gap, mm 0,6
Fuel and lubrication system
Manufacturer/type of carburettor Walbro
Fuel tank capacity, litre 0,5
Weight
Weight without fuel, cutting attachment and guard, kg 5,5
Noise emissions
(see note 1)
Sound power level, measured dB(A) 105
Sound power level, guaranteed L
WA
dB(A) 106
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear, measured
according to EN/ISO 11806 and ISO 7917, dB(A), min./max.:
89/97
Vibration levels
Vibration levels at handles, measured according to EN/ISO 11806
and ISO 7916, m/s
2
At idle, left/right handles, min.: 1,3/1,3
At idle, left/right handles, max.: 1,7/1,6
At max. speed, left/right handles, min.: 3,1/2,6
At max. speed, left/right handles, max.: 5,2/4,1