Heath Zenith Wireless Mechanical Battery Operated Chime 598-1109-05 - Manual (Page 2)

-2- 598-1109-05
5. Mount push button. Use either screws or double sided
tape to mount push button.
To mount with screws, remove back of case by push-
ing in tab on bottom with a small screwdriver (see
Figure 1).
Attach back of case to door jamb or wall (see Figure
4). Snap front of push button on.
When attaching push button using double sided tape,
make sure the surface of the door jamb or wall is
clean.
6. Mount chime. There are three different ways to
mount the chime depending upon the model of chime
purchased. Determine which model you purchased
below. Mount the chime according to the instructions
for your chime.
1 2 3 4 5 6 7
ON
Basic Chime with Separate Chime with Attached
Chime Decorative Cover Decorative Cover
Style of push button and chime may vary from illustration.
Figure 4