Harbor Freight Tools 97320 - Manual (Page 4)

Page 4 SKU 97320 For technical questions, please call 1-800-444-3353.
SpeciFicationS
Weight Capacity
Drawers: 95 Pounds
Top Shelf: 500 Pounds
Overall: 1355 Pounds
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
operating inStructionS
read the entire iMportant SaFety inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Load the Cabinet from the bottom up, evenly distributing weight.
Use the keys to lock the cabinet before moving it.
Only use or move the cabinet on a smooth, level surface, capable of bearing the
combined weight of the Cabinet, tools loaded, and the operator.
To remove a drawer; empty it, and pull the drawer all the way out. On each side
of the back of the drawer, there are small levers on the slider; the lever on the left
side must be pulled up, and the lever on the right side pushed down, to remove
the drawer. Holding the levers in position, slide the drawer off the end of the slid-
ers.
The drawer can be slid back onto the slider and closed with no extra operations.
Clean, then store the product indoors out of children’s reach.
Maintenance and SerVicing
damaged products can fail, causing personal injury. do
not use a damaged product. if abnormal noise or vibration
occurs, have the problem corrected before further use.
beFore eacH uSe, inspect the general condition of the product. Check for
loose screws, misalignment or binding of moving parts, cracked or broken parts
and any other condition that may affect its safe operation.
periodically, clean external surfaces of the product with clean, moist cloth.
1.
2.
3.
4.
5.
6.
1.
2.
caution caution