Haan ALLPRO HS-20 User Manual
Page 9
7
LOCK
UNLOC
K
CL
OSE
OPEN
LO
CK
STEAM READY
POWER
UN
LO
CK
4
7
10
Turn the Pressure Locking
Safety Cap clockwise to tight-
en. The cap will spin freely
when properly tightened.
The accessory attachment
will be locked into position
when the indicator line is lined
up with the handheld double
indicator line.
The Steam Ready Indicator
will light up when the unit is
ready to use.
OPEN
OPEN
CLOSE
CLOSE
LO
CK
UN
LO
CK
5
8
11
NOTE: During extended periods of constant steaming the unit will need to occasion-
ally re-pressurize. While building up pressure the Steam Ready Light will go off. When
the unit has re-pressurized the Steam Ready Light will light up.
NOTE: A slight odor may occur when using the unit for the first time.
To attach the Concentrator
Nozzle, Flexible Extension
Hose or Garment/Surface At-
tachment, line up the indicator
line on the accessory attach-
ment with the indicator line on
the handheld unit.
With an accessory attach-
ment secured to the unit, turn
unit on by plugging into a
grounded electrical outlet.
Press the Easy Control Trigger
2-3 times before steam cleaning
to release any residual water
built up in the nozzle.
6
9
12
Press accessory attachment
onto the Steam Nozzle and
rotate to the “Closed”
position.
When plugged in the green
Power Indicator will light up.
Wait 2-3 minutes for unit to
heat up.
To access continuous steam
push the Continuous Steam
Lock to the “locked” position.
OPEN
CLOSE
OPEN
CLOSE
LO
CK
STEAM READY
POWER
UN
LO
CK
LOCK
UNLOC
K