Hyundai E261D - Manual (Page 60)

57
SETUP
How to Set the Geometry in PC Mode
This function is only available in PC mode.
1
2
3
4
5
Press Menu button.
Menu item appear on the screen.
Press Up or Down button to move to setup.
Press
or button to select setup.
Press Up or Down buttons to move to “PC”.
Press
or button to select “PC”.
Press Up or Down button to move to position.
Press
or button to select position.
Press Up and Down buttons to adjust V-position .
Press
or button to adjust H-position.
After setting press button to exit
Press Up and Down buttons to move to “RESET” .
Press
or button to adjust H/V-position auto .
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu will disappear.
H. POSITION : To adjust the horizontal position of the picture.
V. POSITION : To adjust the vertical position of the picture.
OK
OK
OK
OK
OK
If the display input signal (resolution) has been changed, the picture will be automatically optimized.