1 connecting to an antenna or cable tv, Connecting to an antenna or cable tv – HANNspree MAK-000039 User Manual
Page 27
Advertising
26
2.1.1 Connecting to an Antenna or Cable TV
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (RF-in Analog) on the back of the TV.
2
Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV cable.
Notes:
•
If you cannot receive channels after connecting to an antenna or cable
TV line, try scanning for channels. See “Auto Search” on page 47.
•
RF-in digital input is availble for DTV built-in models only.
ANT jack
Antenna/CATV
Antenna/CATV
socket
Antenna
coaxial cable
(TV/CATV RF)
Advertising