Havis-Shields C-VS-800-CV - Manual

4
INSTALL INSTRUCTIONS C-VS-800-CV
VEHICLE SPECIFIC CONSOLE &
RADIO/HVAC RELOCATION HOUSING
1997-2008 FORD CROWN VICTORIA
TOOLS REQUIRED:
Ratcheting wrench
Standard/Metric socket set
Screwdriver set
Tin snips (if necessary)
Powered Drill w/ 5/16” drill bit
HARDWARE:
QTY DESCRIPTION PART
#
2 #10 x ¾” Phillips sheet metal screws GSM33195
1 Torx Screw Kit C-HK-1
Always!
Disconnect the vehicles’ battery. Removing seat bolts on
some vehicles may give the vehicles computer a false
reading resulting in warning lights. This requires the
vehicles’ computer to be reset.
Read all instructions before installing any Havis-Shields
Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.)
before drilling any holes!
Use hardware provided with install kit.
For product support, visit the Install Instructions Section
of our website at
http://havis.com/Installation/Installation.html , email
[email protected] or call 1-800-524-9900.
Ford Crown Victoria dashboard Remove ashtray and power point
housing from dash
A flat head screwdriver is needed to
release the tray from the slide tracks