Stylus adjustment – Holux GPSmile53 User Manual
Page 35
Advertising
27
GPSmile53
Stylus Adjustment
Control of the unit is accomplished primarily through the stylus by
touching/writing on the screen. If the system cannot correctly identify your
stylus’ input, please run through the screen calibration procedure.
1.
From the settings window, select [Stylus Adjustment] to start the
screen calibration procedure.
2.
Use the stylus and touch
the cross at the center of
the screen once.
3.
Touch the cross in the
second position once.
4.
Touch the cross in the
third position once.
5. Continue
the
calibration
by touching the cross.
6.
setting page will return when stylus adjustment is finished.
Advertising