Hitachi AVC01U - Manual (Page 19)

18
ENGLISH
BASIC OPERATION (continued)
Input Switching
Press the button to access the INPUTS menu. Use the CURSOR
and OK buttons to scroll and select the inputs that are being used.
Pressing the INPUT button repeatedly will also cycle through the Inputs
menu items. Then press the
◄►
and
OK
buttons to select.
AIR/CABLE Select between Air or Cable signal.
INPUT 1 Select to choose Input 1.
INPUT 2 Select to choose Input 2.
INPUT 3 Select to choose Components Input 3.
INPUT 4 Select to choose Components Input 4.
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the button on the remote control.
The display will go out in approximately 6 seconds.
Input Select
button
INFO
button
Input:1 Video
Composite
mode
YPbPr:3
480p
Input mode
Signal mode
YPbPr
Component
mode
Air 15-1
KPBS-HD
3:25 PM
DIGITAL CHANNELS
Digital Channel
Alternate Rating
Main Picture Source
& Channel Indication
Broadcast Channel
Indication
Clock
Audio
Broadcast
Program
Information
Auto
Closed Caption
Setting
D
Show Name
3:00PM-3:30PM
ST TV-G
REGION 5
1080i
Broadcast
Rating
Picture
Format
Digital
Captions
DTvCC
Air/Cable
mode
Air 8
KXYZ
3:17 PM 480i
ANALOG CHANNELS
Analog Channel
Main Picture Source
& Channel Indication
Broadcast Channel
Indication
Clock
Picture Format Broadcast
Rating
Audio
Broadcast
Program
Information
STEREO Auto
Closed Caption
Setting
Audio Source
Selection
A
TV-G ST
Show Name
3:00PM-3:30PM
NOTE
For Digital Channels press the
INFO button again for a more
detailed description of program.
Press the INFO button again to
return to normal viewing.
The Aspect setting will not be
shown if the channel is locked.
Input 3
Input 4
Air/Cable
Input 1
Input 2
Move Select OK