Honeywell HE160 - Manual (Page 7)

HE120, HE160 HUMIDIFIER INSTALLATION KIT
7 69-1571
TROUBLESHOOTING YOUR HUMIDIFIER (TABLE 2)
Table 2. Troubleshooting Humidifier.
Problem What to look for What to do
Water leakage Leaking joints Shut off water.
Tighten connections.
Brass tubing inserts Verify that brass tubing inserts are used.
Saddle valve leaking Verify rubber pad is installed on saddle valve.
No water to basin. Electrical Verify control circuit wiring.
Check all connections.
Humidistat Turn humidistat up and down and listen for contact to
click.
Transformer Verify that outlet has power.
Plumbing Verify plumbing connections.
Check for kinks.
Saddle valve Verify that needle pierced water line and then back
out needle to open valve.
Float valve Remove cover and verify that float is moving freely.
Air leakage Check duct joints Seal with duct tape.
Water flowing into
overflow Device level Level device.
Float valve Check for free movement of float arm.
Adjust water level of float.