Hotpoint DQ891 - Manual (Page 9)

GB
9
Electronic Clock & Automatic
Cooking Feature
- +
Main Oven
Light Time/Mode
The minute minder can be cancelled at any time by
following STEPS 1 and 2, setting the time period to
zero using the +/- control knob.
The display will revert back to the time of day.
The display shows HOURS and MINUTES eg. 1 hour
38 minutes
AUTO COOKING TIMER
There are two Auto Cooking programmes for the
main oven, that can be selected using the display:
(a) To set the main oven to switch ON immediately
and OFF automatically after a time of your choice.
(b) To set the main oven to switch ON and OFF
automatically, at the times of your choice.
(a) To set the main oven to switch ON immediately
and OFF automatically:
This allows you to cook for a specified duration, after
which the oven will automatically switch off.
- +
Main Oven
Light Time/Mode
STEP 1. Check that the correct time of day is set, if
not follow instructions for setting the time of
day.
STEP 2. Place food to be cooked on shelf in the oven.
STEP 3. Switch the main oven control to the desired
mode. The display will automatically suggest
a cooking temperature. This can be changed
by turning the +/- control knob. (The oven will
start).
STEP 4. Press the Time/Mode button, until the
'cooking duration' symbol is flashing.
STEP 5. Turn the +/- control knob to set the cooking
duration you require. After a few seconds the
'cooking duration' symbol will stop flashing
and the display will show the temperature
that has been set. This will change every few
seconds when the display will show the
cooking duration remaining.
THE COOKING DURATION IS NOW SET.
At the end of the set cooking duration, 'End' will
show in the display and an audible tone will be
heard for a few seconds.
Turn the main oven control to 'O', the OFF position to
switch the oven off. The display will revert back to
the time of day.
To cancel the automatic mode at any time turn the
main oven control to 'O', the OFF position.
Note: During the cooking period the cooking
duration will be shown in the display for a few
seconds and then revert to the temperature set.
(b) To set the main oven to switch ON and OFF
immediately:
This allows you to cook for a specified duration and
additionally choose the time you wish the cooking
cycle to finish. From this information the system
works out when the cooking cycle will need to start
and automatically switches the oven on at the
required time.
- Follow STEPS 1 to 5 in the previous section (a)
entitled: 'To set the main oven to switch ON
immediately and OFF automatically', then
continue as below:
- +
Main Oven
Light Time/Mode
STEP 6. Press the Time/Mode button, until the 'end
time' symbol is flashing. The display will
show a default cooking end time (this will be
the current time plus the cooking duration
you set in STEP 5). The 'end time' symbol
will flash.