Harbor Freight Tools 40132 User Manual
Page 4
19. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical re-
placement parts. Use of any other parts will void the warranty. Only use accessories in-
tended for use with this tool. Approved accessories are available from Harbor Freight Tools.
20. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS.
Read warning labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
21. WHEN INSTALLING MOTOR, OBSERVE ALL NATIONAL AND LOCAL CODES. Make
sure to install, protect and fuse according to the latest issue of the National Electric Code,
NEMA Standard Publication No. MG2, and local codes. Ground frames in accordance to
the NEC Article 430. For general grounding information, refer to NEC Article 250.
22. INSTALL GUARDS WHEN APPROPRIATE. Make sure all moving parts, including the
shaft and any attached accessories, are permanently guarded to prevent clothing and body
parts from being caught.
UNPACKING
Make sure the motor is intact and there are no loose parts. If the motor is not intact, contact
Harbor Freight Tools at the number on the front cover for motor replacement. Do not use or
install any motor that has shipping damage.
#40132
Page 4
MOUNTING THE MOTOR
The ambient air temperature where the motor is to be installed cannot exceed 104°F. If it
does, cooling must be provided to ensure the temperature stays within 104°F.
Do not allow the air vents to become blocked when locating the motor.
This motor should be installed indoors, in a clean dry and non-corrosive environment. There
must be no flammables or flammable gasses present.
The height of the four feet under the motor must be within .010" of each other. If the base to
which you are mounting the motor prevents this, use shims to achieve this specification.
Make sure all mounting hardware is securely fastened.
When connecting the direct drive shaft, make sure it is properly aligned or motor life will be
significantly shortened.