Hamilton Beach 80364 - Manual (Page 5)

9 8
This warranty applies to product purchased in the U.S.
or Canada.
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of one (1) year from the date of original purchase, except as noted below. During
this period, we will repair or replace this product, at our option, at no cost. THE
FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY OR CONDITION,
WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING, WITHOUT
LIMITATION, ANY STATUTORY WARRANTY OR CONDITION OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY IS EXPRESSLY LIMITED
TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS FOR
SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
There is no warranty with respect to the following, which may be supplied with this
product, including without limitation: glass parts, glass containers, cutter/strainers,
blades, seals, gaskets, clutches, motor brushes, and/or agitators, etc. This warranty
extends only to the original consumer purchaser and does not cover a defect resulting
from abuse, misuse, neglect including failure to clean product regularly in accordance
with manufacturer’s instructions, use for commercial purposes, or any use not in
conformity with the printed directions. This warranty gives you specific legal rights, and
you may also have other legal rights which vary from state to state, or province to
province. Some states or provinces do not allow limitations on implied warranties or
special, incidental or consequential damages, so the foregoing limitations may not
apply to you.
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please
have model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
hamiltonbeach.com
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
wWARNING
Electrical Shock Hazard
• Unplug unit before cleaning.
• Do not immerse base, plug or cord in water or other liquid.
Failure to follow these instructions can result in death or
electrical shock.
How To Clean
1. Unplug from outlet before cleaning.
2. Remove cover by turning counter-clockwise to unlock
position, then lift straight up.
3. Remove grinding chamber by turning counter-clockwise
until it comes loose from base. Lift grinding chamber
straight up out of base.
4. Grinding chamber and lid can be washed in sink. Grinding
chamber may also be washed on top shelf of dishwasher.
5. Wipe base with a damp cloth.
6. Open the Cord Storage by pulling it away from the grinder
body. Wrap cord around center post. Secure cord in notch.
Close the hide-away cord storage to cover the cord.
840154400 ENv02.qxd 2/7/07 9:37 AM Page 8