Charging a spare battery – HP R-series User Manual

Page 8

Advertising
background image

8

HP Photosmart R-series dock User’s Manual

3

Remove any cables that may

be attached to your camera.

Then, insert the camera into the

camera dock as shown here.

The back of the camera must

point toward the edge of the

dock with the two buttons.

Charging a Spare

Battery

Insert a spare rechargeable lithium ion battery into the dock

recharging bay door with the arrows on the top of the battery

(1) pointing toward the door, as shown in the picture.
Push the battery into the

recharging bay until the slide

knob (2) snaps down. (The slide

knob must be pushed up to

remove the battery.) Make sure

the spare battery charging light

(see page 9) begins blinking.

Caution

Read

Battery Safety

Precautions

on page 20 carefully before recharging lithium ion

batteries.
The first time that you use a rechargeable battery, be sure that

you charge it fully before using it in your camera. It may take

up to 2.5 hours to fully charge a new battery in the dock, or

3.5 hours to charge a fully depleted battery. You can charge a

battery in the camera while simultaneously charging a battery

in the dock, but the battery in the dock will charge more

quickly than the battery in the camera. (See

Battery Charge

Times

on page 20 for details.)

1

2

Advertising