Henny Penny CF-941 - Manual

Model CF-941
SECTION 3. OPERATION
3-1. INTRODUCTION This section provides operating procedures for the
multipurpose holding cabinets. Read the Introduction,
Installation and Operation Sections and all instructions
should be followed before operating the cabinet.
This section contains an explanation of all controls,
components, and information on operating procedures
and daily maintenance.
3-2. OPERATING Figure 3-1 identifies and describes the functions of all the
CONTROLS AND operating controls and components of the cabinet.
COMPONENTS
Item Description Function
No.
1 Digital Display An LED display which shows the time of day and drawer
temperature
2 LEDs When illuminated, indicates which drawer is heating
3 Up and Down Used when programming the controls, changing the
Buttons display, and accessing the Special Program Mode
4 POWER Switch A rocker switch that controls the power to the unit
5 TEMP Button Used to view the drawer temperature and to set the setpoint
temperature for the drawer
6 SET Button Used in the Program Mode
7 Timer Buttons Used to start a timing cycle for a particular pan or to view
the time remaining in the cycle; they are also used when
programming the times
203 3-1