HP 24SII - Manual (Page 59)


&
 

The Model 24SII DES has four Form Feed Modes allowing you to
determine when form feed occurs at the printers you are selecting: at
the beginning of printing, at the end of printing, or both. This feature
is useful when sending DOS files to a laser printer.
Factory default is no form feed.
)   
You can print a programmable message and the Logical Name of the
source computer on a separate sheet of paper before or after printing
any other data. You can enable or disable the I.D. Page Message and
whether you want it to print before or after the print job. This page
prints in addition to the form feed. The I.D. Page Message is useful
for identifying various users' print jobs in the event you have several
people printing to the same printer frequently, such as in a classroom
environment.
Factory default is: "This print job is for:", with the I.D. message
disabled.

# 

 
  
Individual computer ports may be configured to have print jobs sent to
a specific default printer port automatically. The Default Printer
Assignment consists of the module number (1 to 6) and the port
number (1 to 4) that the printer is physically connected to on the
Model 24SII DES. The Default Printer Assignment may be set to 0 for
contention mode in which case all print jobs sent from the particular
computer will be sent to the first available printer.
Any print job sent without a port select sequence preceding it will
automatically go to the default printer port upon initial power-up.
Factory default is 0 for contention mode.