Setting up a client server in netware, E 20, Ge 20 – HP 1218 User Manual
Page 22
hp photosmart 1215/1218 color printer network guide for windows
20
Setting Up a Client Server in Windows NT 4.0 or Windows 2000
1. Set up the printer. Follow the Quick Start poster included in the box. Be sure to connect the printer to the HP JetDirect External Print
Server using a bi-directional IEEE 1284-compliant parallel cable.
2. Set up the HP JetDirect External Print Server. Install and configure the HP JetDirect External Print Server according to the instructions
provided with the print server.
3. Install the printer software on the Windows NT 4.0 or Windows 2000 server and share your printer on the network. Be sure to
select the port you configured when you set up the HP JetDirect External Print Server.
•
Windows NT 4.0 Server: See the Minimal Installation instructions in “Installing the Printer Software on a Windows NT 4.0
•
Windows 2000 Server: See the Minimal Installation instructions in “Installing the Printer Software on a Windows 2000 Host”
4. Install the printer software on each of the client computers. See “Installing the Printer Software on Each Client” on page 11 to find
instructions for your operating system.
Setting Up a Client Server in NetWare
•
Refer to Novell's documentation or web site for NetWare printer installation methods and NetWare client software.
•
See the documentation that came with your HP JetDirect External Print Server or search on “Novell” at
www.hp.com/cposupport
for information on setting up an HP JetDirect External Print Server in a NetWare environment and for additional network printing
information.
•
You can copy your HP PhotoSmart 1215/1218 printer software to a NetWare drive. See the language code table on page 21 to
help you select which languages and operating systems you should copy.