HP Raining DataCorp. mvEnterprise - Manual (Page 41)

20. From an AIX command shell, type this command:
./prodpick -l99 -oh -t/dev/prodpick.lj3pcl.99 -v20 &
where:
prodpick
mvEnterprise program.
-l99
Run printer on mvEnterprise port
nintynine.
-oh
Suppress LOGON banner at
startup of printer process.
-t/dev/prodpick.lj3pcl.99 Use this pipe for output.
-v20
Restrict to 20 the number of VFS
pages for use by the
mvEnterprise spooler process.
&
Run process in the background.
The pipe name is written to /tmp/prodpick.lj3pcl.99 as a lock to
prevent two pipes with the same name. This lock is released when the
pipe is shut down. If this procedure is being run from a script, it is
necessary to sleep for 5 seconds between commands to allow the pipe
adequate time to start.
21. From within mvEnterprise, start the printer. Type:
STARTPTR 0,0,0,S99
mvEnterprise Release 4.1 on AIX Installation Guide Page 39