Hitachi CMP5000WXU - Manual (Page 38)

30
En
English
Additional Information
Specifications
General
Light emission panel ............ 50 inch plasma display panel
Number of pixels .............................................. 1280 x 768
Power supply ............................. AC 100 - 120 V, 50/60 Hz
Rated current .................................................. 3.8 A - 3.1A
Standby power consumption ...................................... 1 W
External dimensions ........ 1218 (W) x 714 (H) x 98 (D) mm
............................. 47-31/32 (W) x 28-1/8 (H) x 3-7/8 (D) in.
Weight ............................................. 38.9 kg (85 lbs. 12 oz)
Input/output
Video
INPUT 1
Input Mini D-sub 15 pin (socket connector)
RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75
Ω
/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity
/2.2 k
Ω
G ON SYNC
... 1 Vp-p/75
Ω
/negative sync.
*Compatible with Microsoft’s Plug & Play
(VESA DDC1/2B)
Output Mini D-sub 15 pin (socket connector)
75
Ω
/with buffer
INPUT 2
Input BNC jack (x5)
RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75
Ω
/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity/
75
Ω
or 2.2 k
Ω
(impedance switch)
G ON SYNC ...
1 Vp-p/75
Ω
/negative sync.
Additional Information
Audio
Input AUDIO INPUT (for INPUT 1/2)
Stereo mini jack
L/R ... 500mVrms/more than 10 k
Ω
Output AUDIO OUTPUT
Stereo mini jack
L/R ... 500mVrms (max)/less than 5 k
Ω
SPEAKER
L/R ... 8 – 16
Ω
/2W +2W (at 8
Ω
)
Control
RS-232C ... D-sub 9 pin (pin connector)
COMBINATION IN/OUT
... Mini DIN 6 pin (x2)
CONTROL IN/OUT ... monaural mini jack (x2)
Accessories
Power cord ....................................................................... 1
Remote control unit ......................................................... 1
AA (R6) batteries .............................................................. 2
Speed clamps ................................................................... 2
Bead bands ...................................................................... 2
USER’S MANUAL ............................................................ 1
÷ Due to improvements, specifications and design are subject to
change without notice.