Hoover QS Quiet - Manual (Page 7)

Attach the curved wand to the
straight wand. Position cord into
cord clips on extension wands,
placing excess cord between noz-
zle and bottom cord clip.
To attach the hose to the exten-
sion wands, rotate the plastic
latch ring on the handle to accept
the button projection on the curv-
ed wand.
Push the handle over the wand so
that the button projection fits into
the slot. Turn the latch ring on the
handle to lock the handle and
wand in place.
Connect nozzle power cord to
receptacle underneath handle.
6