Hand Held Products 7400/7450 - Manual (Page 42)

4 - 2
Reading A Bar code
1. Press the ON/SCAN button on the 7400 or the Scan Trigger on the 7450 to project the scanner’s bright red or green aim-
ing beam. The aiming beam should be oriented in line with the bar code to achieve the quickest read. A range of 4-10
inches (10-25 cm) is recommended.
2. Center the aiming beam over the bar code. The red SCAN LED illuminates when the user presses the ON/KEY key, and
the green DECODE LED illuminates when a bar code is successfully decoded and the terminal beeps.
Scan LED Decode LED
Linear bar code 2D Matrix symbol