Harbor Freight Tools 93781 User Manual
Page 6
SKU 93781
For technical questions please call 1-800-444-3353.
Page 6
Specific Safety Rules for the Battery Charger
1.
Maintain labels and nameplates on the Battery Charger. These carry important
information. If the labels are unreadable or missing, contact Harbor Freight Tools for
replacement.
2.
Always place the Battery Charger on a dry, flat, level, sturdy nonflammable work
surface capable of supporting the weight of the Battery Charger. Make sure to place
the Battery Charger in a location that is out of reach of children.
3.
The Battery Charger is not a toy and should not be used by children.
WARNING! Risk of explosive gases:
1.
Working in the vicinity of lead-acid batteries is dangerous. Batteries generate
explosive gases during normal battery operation. For this reason, it is of utmost
importance that each time before using this Battery Charger you read and under-
stand all safety warnings and precautions as outlined in this manual and those
manuals published by the battery and vehicle manufacturers and manufacturers
of any equipment you intend to use in the vicinity of the battery.
Personal Precautions:
1.
ALWAYS wear ANSI approved safety impact eye goggles when working with lead-acid
batteries.
2.
Make sure someone is within range of your voice and close enough to come to
your aid when you work near a lead-acid battery.
RECOMMENdEd MINIMUM WIRE GAUGE FOR EXTENSION CORdS*
NAMEPLATE
AMPERES
(At Full Load)
EXTENSION CORd LENGTH
25 Feet
50 Feet
75 Feet
100 Feet
150 Feet
0 - 2.0
18
18
18
18
16
2.1 - 3.4
18
18
18
16
14
3.5 - 5.0
18
18
16
14
12
5.1 - 7.0
18
16
14
12
12