Harmony House JT100 - Manual (Page 18)

Section 4 - Appendix
Mirage Factory Preset List
Bank 1 Bank 5
1. Match This 1. Solo Stack
2. Voxy Verb 2. Flangey Johnson
3. Johnson Gain Solo 3. Octo Bassy
Bank 2 Bank 6
1. True Blackface 1. Modern Rockabilly
2. British Steel 2. Guitar Organ
3. Johnson Clean Chorus 3. Electro 12 String
Bank 3 Bank 7
1. Singing Boogie 1. Chorus Amongus
2. Rockin’ Phase Tweed 2. Buster Brown
3. Bluesy Slider 3. Super Solo
Bank 4
1. Recto-Fire
2. Twin Leslied
3. Vox Triplets
14
Johnson Mirage User’s Guide Section Four - Appendix
Specifications
Inputs
Input: 1/4” unbalanced
Input Impedance: 470 k Ohm
Loop Return: 1/4” Stereo TRS
Loop Return Impedance: 470 k Ohm
Maximum Return Level: +18 dBu
Outputs
Loop Send: 1/4” Stereo TRS
Loop Send Impedance: 680 Ohm
Maximum Send Level: +18 dBu
Headphone: 1/4” Stereo TRS
Headphone Impedance: 10 Ohm minimum
Controller Connections
J8 Controller: 5 pin DIN
JT3 Switch: 1/4 TRS
Power Amp
JT50 Power Amp Output Mono: 50 Watts RMS. into 8 ohms
JT100 Power Amp Output Stereo: 100 Watts RMS. (50 per channel)
into 8 ohms
DSP Section
Signal to Noise: Greater than 98 dB (A-weighted) ref=max signal,
22kHz measurement bandwidth
A/D Converter: 24 bit
D/A Converter: 24 bit
Power
Power Requirements: 100, 120, 230 or 240 VAC 50/60 Hz
Power Consumption: 125 Watts
Memory Capacity
User: 21 Presets
Dimensions: 11.5” (D) x 23.4” (W) x 18” (H)
Net Weight: 43.2 lbs.