Panorama mode – HP CC330 User Manual
Page 24
23
22
23
22
Panorama mode
Panorama mode
allows you to create a panoramic picture across a distant scene. The camera will
automatically compose a panoramic picture using the individual shots that you take.
Follow these steps to create a panoramic picture:
1. Press the
and use the Right button to highlight the Panorama Mode (
) and press the
to enter.
2. Use the
Left/Right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic
sequence will commence automatically.
3. Compose the first view of the panoramic
picture on the LCD screen and press the
Shutter button to capture.
4. After the first shot is taken, the semi-
transparent image of the first shot will
appear at the edge of the screen. You
can use this image to compose your
picture before you press the Shutter button to capture and finish manual stitching.
5. The camera will then stitch the pictures into a panorama automatically.
6. Press the
button to enter Playback mode and review the panorama result.
After taking a Panoramic picture press the
button to save and exit or press the Delete button to
cancel and exit.
Flash Mode, Self-timer, Macro Mode, and Exposure Compensation are disabled on Panorama Mode.
Pictures cannot be deleted, nor the zoom adjusted until the series is finalized.
Panorama Mode can stitch 2 or 3 maximum