Bar and chain combinations, Saw chain filing and file gauges, Technical data – Husqvarna 435 User Manual
Page 32
English – 32
TECHNICAL DATA
1153135-95 Rev.1 2009-12-29
Bar and chain combinations
Chain saw models Husqvarna 435, 435e and 440e met the kickback performance requirements of ANSI B 175.1-2000
when tested with the combinations of bars and saw chains listed below. The saw chain Husqvarna H30 is also classified
as a low kickback saw chain since it met the requirements for low kickback saw chain outlined in ANSI B 175.1-2000.
We recommend to use only the listed combinations of bars and chains for chain saw models Husqvarna 435, 435e and
440e. Other chain saw models may not meet the kickback requirements when equipped with the listed bar and chain
combinations.
Saw chain filing and file gauges
Bar
Chain
Length, inch
Pitch, inch
Thickness of drive
links, inch/mm
Max. nose radius
Type
Drive link count
13
0,325
1,3
10T
Husqvarna H30
56
15
0,325
10T
64
16
0,325
10T
66
18
0,325
10T
72