Harman CINEMA 500 - Manual (Page 4)

4
SPEAKER MOUNTING OPTIONS
SHELF-MOUNTING
Satellites:
Center:
1. 3. 2.
WALL-MOUNTING
IMPORTANT SAFETY NOTE: The customer is solely responsible for
proper selection and installation of mounting hardware not included
with the speakers. JBL disclaims any liability for the selection and
installation of mounting hardware.
Be sure to follow these installation instructions carefully. If you have
any questions or doubts about your ability to wall-mount the speakers
correctly, consult with your authorized JBL dealer or custom installer.
Satellite
1-15/16"
(49mm)
2-3/16"
(55mm)
7-11/16"
(195.5mm)
Center
1. Decide on locations for the speakers according to the recommendations
in Placing the Speakers, on page 3.
2. Select wall-hanging hardware that is appropriate for the construction
and materials of your walls. The Cinema 500 front, center and surround
speakers weigh 3.25 lb (1.47kg) each. Be sure to use hardware that can
support their weight.
3. Install the wall-hanging hardware on the walls. Make sure that the
hardware is driven into studs and not into drywall or plaster. If the
hardware must be mounted in drywall or plaster, you are
responsible for selecting and using wall anchors that are
appropriate for the construction and materials of your walls.
4. Hang the speakers on the wall-mount hardware.