Servicing your outboard motor – HONDA BFP8D User Manual
Page 83
81
SERVICING YOUR OUTBOARD MOTOR
ENGINE COVER LATCH
UNLATCH
FUEL PUMP FILTER
FUEL HOSE
FUEL PUMP FILTER
Unlatch and remove the engine
cover for access to the fuel pump
filter.
Inspect the filter for water and/or
sediment accumulation.
If the filter is OK, reinstall it. If
water and/or sediment are present,
replace the filter as described in
the following steps. Always
replace the filter at the scheduled
replacement interval (p.
Disconnect the fuel hose from the
outboard motor, and place clamps
on the fuel hoses on each side of
the filter to prevent fuel leakage
when the fuel hoses are
disconnected.
Remove the fuel hoses from the
used filter, and discard the filter.
To ease hose removal, release the
tube clamps by squeezing the clip
ends together with pliers while
pulling off the hoses.
3.
2.
1.
4.
04/03/15 10:36:02 31ZY0600_082