Hornet Car Security 564T - Manual (Page 23)

20 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
Page Recognition Mode
The transceiver will leave a zone icon illuminated when it has
received a triggered response and will wait for violation recogni-
tion. Press any button on the transceiver, the LCD information
and alarm page alerts will be cleared.
u ussiin ng g yyo ou urr ssyysstte em m
warning! safety first
The following safety warnings must be observed at all times:
➤ Due to the complexity of this system, installation of this
product must only be performed by an authorized Directed
dealer.
➤ When properly installed, this system can start the vehicle via
a command signal from the remote control. Therefore, never
operate the system in an enclosed area or partially enclosed
area without ventilation (such as a garage). When parking in
an enclosed or partially enclosed area or when having the
vehicle serviced, the remote start system must be disabled
using the installed toggle switch. It is the user's sole respon-
sibility to properly handle and keep out of reach from chil-
dren all remote controls to assure that the system does not
➜
note: The transceiver buttons will not send a command
to the system until the alarm page is cleared.