Harman-Kardon CP 25 - Manual (Page 4)

VCR (Video 1) TV or Video Monitor
In/Rec
Out/Play
L R VIDEO Video S-Video Component Video
Y Pb Pr
Component Video
Y Pb Pr
Cable or Sat or HDTV Set-Top Box (Video 2)
OUT
L R Video S-Video
Optical Coax
AUDIO RECORDER
REC/IN
PLAY/OUT
IN
SOURCE COMPONENT CONNECTIONS
Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4 inputs are on the front panel of the receiver.
Device Input Name Audio Input Connections Audio Output Connections Video Connections
CD Player CD CD L/R Inputs, Optical Digital 1 or 2, or Coaxial Digital 1 or 2 Not required Not required
VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output
Cable Box or Satellite Receiver Video 2 or 3 Video 2 or 3 L/R Inputs, Optical Digital 1 or 2, or Coaxial Digital 1 or 2 Inputs* Not required Video 2 or 3 Composite or S-Video or Component Video Input
Audio Recorder Tape Tape L/R Inputs , Optical Digital 1/2** or Coaxial Digital 1/2** Inputs Tape L/R Outputs , Digital Optical** or Coaxial Outputs** Not required
TV or Video Display Not applicable Not required Not required Monitor-Out Composite and/or S-Video and/or Component
* Check with your cable company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not. ** Digital audio recorders only.
250 Crossw
ays P
ark Drive
,W
oodbury
,New
Yo
rk 11797 www
.harmankardon.com
© 2004 Harman International Industries
,Incorpor
ated P
art No
.CQE1A234Z
A Harman International Company
Figure 5 – Source Component Connections
Dashed lines (– – – –) indicate coaxial and optical digital audio connections. Choose either type
(but not both) for each digital audio source.
Dotted lines (••••) indicate component, composite or S-video connections. Component video is
the preferred connection when available, but you may use any of the three types (but not more
than one). When component, composite and S-video sources are connected to the AVR, you must
also connect all outputs from the AVR to your TV.
®