Operation, Before starting engine – Husqvarna 6521CM User Manual

Page 7

Advertising
background image

7

OPERATION

TO EMPTY GRASS CATCHER (See Fig. 6)

1. Lift up on grass catcher using the frame han dle.

2. Remove grass catcher with clippings from under lawn

mower han dle.

3. Empty clippings from bag.

NOTE: Do not drag the bag when emptying; it will cause
unnecessary wear.

BEFORE STARTING ENGINE

ADD OIL (See Fig. 7)

Your lawnmower is shipped without oil in the engine. For
type and grade of oil to use, see “EN GINE” in the Mainte-
nance section of this manual.

CAUTION: DO NOT overfi ll engine with
oil, or it will smoke on startup.

1. Be sure lawnmower is level.

2. Remove oil dipstick from oil fi ll spout.

3. You receive a container of oil with the unit. Slowly

pour the entire container down the oil fi ll spout into the
engine.

NOTE: Initial oil fi ll requires only 18 oz. due to residual oil
in engine from the manufacturers 100% quality testing.
When changing oil you may need 20 oz.

4. Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil if needed. Fill

to full line on dipstick.

FIG. 6

FRAME

HANDLE

FIG. 5

OPEN
MULCHER DOOR

INSTALL
DISCHARGE
DEFLECTOR

MOWER IS NOW READY FOR

DISCHARGING OPERATION

ENGINE
OIL CAP

GASOLINE
FILLER
CAP

FIG. 7

PRIMER

Advertising