Hitachi DVP315U - Manual (Page 20)

20
ENGLISH
DIGITAL AUDIO OUT JACK
Use either an optical or coaxial digital
cable to connect to a compatible
Dolby Digital receiver. Use to connect
to an A/V Amplifier that contains a
Dolby Digital decoder or DTS
decoder.
MIXED AUDIO OUT JACKS
Connect to the Audio input jacks of
your television, audio/video receiver.
VIDEO OUT JACK
Use a video cable to connect one of
the jack to the Video input on your
television.
S-VIDEO OUT JACK
Use the S-Video cable to connect this
jack to the S-Video jack on your
television for a higher quality picture.
The S-Video must be selected in the
VIDEO OUT SELECT SWITCH.
COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with
Component Video in jacks. These
jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video
provides the best picture quality. The Y,
Pb, Pr must be selected in the VIDEO
OUT SELECT SWITCH.
VIDEO OUT SELECT SWITCH
Use the switch to set video out.
If the Y, Pb or Pr is selected, the S-
Video may not work.
If the S-Video is selected, the Y, Pb or
Pr may not work.
D
escription-Rear Panel
COMPONENT VIDEO OUT
Y Pr
Pb
VIDEO OUT S-VIDEO OUT MIXED AUDIO OUT
R L
OPTICAL COAXIAL
DIGITAL AUDIO OUT
S-VIDEO
Y,Pb,Pr
VIDEO OUT
SELECT
Rear Panel