Setup and connections – Harman-Kardon DVD 27 User Manual

Page 11

Advertising
background image

SETUP AND CONNECTIONS 11

Setup and Connections

■ Ensure that the power switch of this unit and

other equipment to be connected is set to off
before commencing connection.

■ Do not block ventilation holes of any of the

equipment and arrange them so that air can
circulate freely.

■ Read through the instructions before

connecting other equipment.

■ Ensure that you observe the color coding

when connecting audio and video cables.

Notes:
■ The Video output (yellow) combines the com-

plete video signal (composite) and sends it to
the TV (or to the AV Receiver) by one line
only. Use the Video output, when your TV set
is equipped with a Video input jack only.

■ The S (separate) video output connector sepa-

rates the color (C) and luminance (Y) signals
before transmitting them to the TV set in
order to achieve a sharper picture. Use the
S-video cable when connecting the player to
a TV equipped with an S-video input

for improved picture clarity. Never connect
both outputs, Video and S-Video, to your TV
or AV Receiver, only one of them.

■ Most European TV´s are equipped with SCART

connectors rather than with a normal video
input (yellow cinch). In that case the SCART
connection should be used, providing the
audio signal too. Separate analog audio con-
nections to TV are needed only if your TV is
connected to the video or S-video output.

■ When the audio signal is to be fed to a stereo

or Pro Logic amplifier/decoder or receiver
rather than to the TV, connect the Audio Out
jacks to any normal audio input on your
amplifier/decoder/receiver. The DVD will
”downmix” Dolby Digital recordings to Pro
Logic, available on these connectors, all ana-
log surround or stereo signals will be fed to
them directly.
You can also select the audio and video sig-
nals of all your video devices with your AV
Receiver/Amplifier. For more information see
”Note” on next page.

TV

To power outlet

(AC 230V/50 Hz)

To S-Video input connector

To stereo audio input connector
(Red/White) on the TV or Stereo/Pro Logic
Amplifier/Receiver

To Video input

connector (Yellow)

Connecting to a stereo TV and stereo or Pro Logic Amplifier/Receiver

DVD

Advertising