Unpacking, Operation, Symbology – Harbor Freight Tools 45005 User Manual
Page 8
SKU 45005 For technical questions, please call 1-800-444-3353.
Page 8
Unpacking
When unpacking, make sure that the Battery Charger is intact and undamaged.
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
Operation
1.
Place the Battery Charger about six feet from the battery being charged.
2.
If the battery to be charged is in a vehicle, verify that the ignition is off, remove
vehicle’s cables from battery, then connect the positive (Red with +) Cable
Clamp to the positive (+ or P) terminal of the battery.
If necessary, clean the battery terminals. Wiggle the Cable Clamp on the battery
terminal to get a good connection.
3.
Connect the negative (Black with –) to an unpainted, solid metal portion of the
vehicle.
If the battery is outside the vehicle, connect the negative (black with –) Cable
Clamp to the negative battery terminal.
4.
Set the Battery Charger switch to the proper setting for the type battery being
charged. Refer to the table on the next page.
SYMBOLOGY