Humax PVR-8100T - Manual (Page 18)

**
2.2 Powering On
1. Connect the power cord of the receiver to a wall outlet.
Turn on the power switch, located at the left on the back of the receiver.
Make sure that the Standby LED indicator is turned on Red.
**
**
2. Press the DTV button to control the receiver using the remote controller.
3. Press the STANDBY button on the Remote Controller or on the receiver.
**
**
**
GB 17
**
**
**
**
**
**
**
**
**
**
**
**
**
**