Hitachi SH-P300 - Manual (Page 130)

Section 2: Understanding Your Phone
121 2J: E-mail
ᮣ POP3 Server Address: Enter the server address for the POP3 server.
ᮣ POP3 Server Account: Enter the POP3 server account name.
ᮣ POP3 Server Password: Enter your POP3 server password.
ᮣ APOP Auth: Specify whether APOP authentication is ON or OFF when
you receive e-mail.
ᮣ SMTP Server Address: Enter the server address for the SMTP server.
ᮣ Authentication: Specify whether SMTP authentication is ON or OFF
when you send e-mail.
ᮣ SMTP Server Account: Enter the SMTP server account name (only
when Authentication is set to ON).
ᮣ SMTP Server Password: Enter your SMTP server password (only
when Authentication is set to ON).
ᮣ Sender Email Address: Enter your e-mail address and press .
8. Highlight Yes and press .
Tip: Press E to exit the Email Menu and return to the Standby screen.
Changing the Server Settings
As well as the settings you specified when you first registered, you can also
set your sender name and signature.
To change the server settings:
1. From the Standby mode, press to display the main menu.
2. Highlight Email and press .
3. Highlight Settings and press .
4. Highlight Server and press .
5. Highlight the server with the settings you want to change and press
.
6. Highlight the setting you want to change and press .
ᮣ Setting Name: Changes the server name.
Save
OK
Menu
OK
OK
OK
Edit
OK