Harbor Freight Tools 46055 - Manual (Page 2)

Page 2
SKU 46055
Double Insulated Motor 3.5 Amps, 120 V / 60 Hz / Single Phase
Variable Speed Range 500-3000 SPM, Six Speed Settings
Maximum Cutting Depth 2-1/8 inch
Stroke 3/4 inch
Cord 18 Gauge, Two Prong
Includes 6 TPI and 24 TPI Blades and Tiltable Base (TPI = Teeth per Inch)
E194601
This Jigsaw uses Universal (U) Shank Blades.
Replacement Blade ITEM #: 02713 - 14 Pc. Jigsaw Blade Set.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep the
manual and invoice in a safe and dry place for future reference.
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
Electrical Safety
4. Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding prong
or modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If the
tools should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
Specifications
REV 02/05