HP 720 Series - Manual (Page 47)

5-Unloading, printing, & displaying images 47
Unloading, printing,
& displaying images
Once you have taken pictures, you can unload them from your
camera to a computer, print them directly to a printer, or
display them on a television.
Unloading to a computer
NOTE You can also use the optional HP
Camera Dock to do this task. See
Appendix B: Camera dock on
page 73.
NOTE If you are using a Macintosh
computer, switch the camera to Disk
Drive in the USB Configuration
menu found in the Setup menu.
1 Your camera came with a special
USB cable for connecting the camera
to a computer. Connect the larger end of that USB cable to
the computer.
2 Open the memory card door on the side of the camera and
connect the small end of the USB cable to the USB connector
on the camera.
3 Turn on the camera. The HP Image Unload software will
launch on your computer, and the images in the camera will
automatically unload to the computer. If there were any
images in the camera that were selected in the Share menu
for printing or e-mail, those actions are started after the
images have been unloaded to the computer.
5