Husqvarna SD22B5DSA - Manual (Page 14)

14
ASSEMBLY/CoNTRoLS
Rotate the handle and tighten it in place. 1.
Fill the engine with the manufacturer- 2.
recommended oil. See section “Lubrication/
Engine oil”.
Test the clutch. Make sure that the clutch
3.
expansion spring disengages 6.35 mm (¼") easily.
The engine RPM is preset by the manufacturer. 4.
Idle speed is 1250–1400 RPM. Maximum engine
speed is 3600 RPM.
See the engine manual for instructions on adjusting
the regulator and carburetor if the engine speed is not
within these limits.
Engine oil refill 1.
Clutch cable 2.
Clutch bail 3.
Engine 4.
Depth lever 5.
1
2
3
4
6
5
7
Knob for collapsible handle 6.
Handle 7.
Shaft guard 8.
Belt shield 9.
9
8