HP xw4600 - Manual (Page 20)

Thermal Alert (Requires HP
Client Manager Software) Monitors the temperature state within the chassis. Three modes:
NORMAL - normal temperature ranges
ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to avoid
shutdown or provide for a smoother system shutdown
SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the computer
without warning before hardware component damage occurs
Remote ROM Flash Provides secure, fail-safe ROM image management from a central network console
Remote Wakeup System administrators can power on, restart, and power off a client computer from a remote
location.
ACPI (Advanced
Configuration and Power
Management Interface) Allows the system to enter and resume from low power modes (sleep states)
Controls system power consumption, making it possible to place individual cards and peripherals
in a low-power or powered-off state without affecting other elements of the system
Supports ACPI 2.0 for full compatibility with 64-bit operating systems
SMBIOS System Management BIOS 2.5, previously known as DMI BIOS, for system management information
ROM revision levels Identifies system ROM revision levels and reports in Computer Setup Utility (F10).
Version is stored in an industry standard memory location (SMBIOS) so that management SW
applications can use and report this information
System board revision level Allows management SW to read revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified
Ownership Tag A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen
Remote ROM Flash Provides secure, fail-safe ROM image management from a central network console
Remote Wakeup/
Remote Shutdown System administrators can power on, restart, and power off a client computer from a remote
location.
Enables cost-effective power consumption when the administrator needs to distribute software,
perform security management, or update the ROM.
ROM Based Setup (F10)
and Start-up Diagnostics Yes
Industry Standard Industry Standard Industry Standard Industry Standard Revision Supported by the BIOS Revision Supported by the BIOS Revision Supported by the BIOS Revision Supported by the BIOS
ACPI Advanced Configuration and Power Management Interface, Version 2.0
ASF Alert Standard Format Specification, Version 2.0
ATAPI ATAPI Removable Media Device BIOS Specification Version 1.0
BBS BIOS Boot Specification v1.01
BIOS 32-bit Services Standard BIOS 32-bit Service Directory Proposal
CD Boot "El Torrito" Bootable CD-ROM Format Specification Version 1.0
EDD Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0
EHCI Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0
PCI PCI Local Bus Specification, Revision 2.3
PCI Power Management Specification, Revision 1.1
PCI Firmware Specification, Revision 3.0, Draft .7
PCI Express PCI Express Base Specification, Revision 1.1
PCI Express Base Specification, Revision 2.0
PMM POST Memory Manager Specification, Version 1.01
SATA Serial ATA Specification, Revision 1.0a
Serial ATA 3 Gb/s: Extensions to Serial ATA 1.5 Gb/s, Revision 1.0
SMBIOS System Management BIOS Reference Specification, Version 2.5
SPD PC SDRAM Serial Presence Detect (SPD) Specification, Revision 1.2B
QuickSpecs
HP xw4600 Workstation HP xw4600 Workstation HP xw4600 Workstation HP xw4600 Workstation
Technical Specifications
DA - 12792 Worldwide — Version 1 — October 1, 2007 Page 20