Attaching the dome cover, Routine maintenance, Cable guidelines – Honeywell HD3VC4SAX User Manual
Page 2: Product dimensions, Warranty and service, Europe and united kingdom, Specifications, Contact information, Cable guidelines product dimensions, Specifications contact information
+1.800.796.CCTV (North America only)
900.0824 - 09/06 - Rev 1.01
© 2006 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written
permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However,
Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof. The information contained
herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
Attaching the Dome Cover
To attach the dome cover, follow
Figure 2
:
1.
Use a soft, lint-free cloth to wipe the dome
cover clean and remove fingerprints.
2.
Attach the inner liner (#3) to the Tilt
adjustment thumbnuts (#2). Push down
until it clicks into place.
3.
Place the dome (#4) on the unit. Make
sure all three dome tabs (#5) are inside the
housing opening.
4.
Turn the dome gently clockwise until it
locks in place.
Routine Maintenance
•
The dome cover is an optical part. Use a
soft, dry cloth to remove any fingerprints or
dust.
•
Clean the camera housing with a soft, dry
cloth. For more stubborn stains, use a cloth
dampened with a small quantity of neutral
detergent, then wipe dry.
Caution
Do not use volatile solvents such as
alcohol, benzene or thinners to avoid
damaging the surface finish.
Cable Guidelines
Product Dimensions
Figure 6
Camera Dimensions
Warranty and Service
Subject to the terms and conditions listed on the
Product warranty, during the warranty period
Honeywell will repair or replace, at its sole
option, free of charge, any defective product
returned prepaid.
In the event you have a problem with any
Honeywell product, please call Customer
Service for assistance or to request a Return
Merchandise Authorization (RMA) number.
Call 1.800.796.CCTV (North America only).
Be sure to have the model number, serial
number, and the nature of the problem available
for the technical service representative.
Prior authorization must be obtained for all
returns, exchanges, or credits. Items shipped
to Honeywell without a clearly identified
Return Merchandise Authorization (RMA)
number may be refused.
Europe and United Kingdom
For warranty information please contact your
Honeywell dealer.
Specifications
Contact Information
Honeywell Video Systems (Head Office)
2700 Blankenbaker Pkwy, Suite 150
Louisville, KY 40299, USA
℡ +1.800.796.2288
Honeywell Security Australia Pty Ltd.
Unit 5, Riverside Centre, 24-28 River Road West
Parramatta, NSW 2150, Australia
℡ +61.2.8837.9300
Honeywell Security Asia Pacific
33/F Tower A, City Center, 100 Zun Yi Road
Shanghai 200051, China
℡ +86 21.2527.4568
Honeywell Security Asia
Flat A, 16/F, CDW Building, 388 Castle Peak Road
Tsuen Wan, N.T., Hong Kong
℡ +852.2405.2323
Honeywell Security France
Parc Gutenberg, 8, Voie La Cardon
91120, Palaiseau, France
℡ +33.01.64.53.80.40
Honeywell Security Italia SpA
Via Treviso 2 / 4
31020 San Vendemiano
Treviso, Italy
℡ +39.04.38.36.51
Honeywell Security Spain
Mijancas 1. 3
a
Planta
P.Ind. Las Mercedes
28022 Madrid, Spain
℡ +34.902.667.800
Honeywell Security Nederland
Netwerk 121
1446 WV Purmerend, Netherlands
℡ +31.299.410.200
Honeywell Video Systems UK Ltd.
Aston Fields Road, Whitehouse Ind Est
Runcorn, Cheshire, WA7 3DL, UK
℡ +0844.8000.235
Honeywell Security South Africa
Unit 6 Galaxy Park, 17 Galaxy Avenue
Linbro Park, P.O. Box 59904
2100 Kengray, Johannesburg, South Africa
℡ +27.11.574.2500
Honeywell Security Germany
Johannes-Mauthe-Straße 14
D-72458 Albstadt, Germany
℡ +49.74 31.8 01.0
Honeywell Security Poland
Chmielewskiego 22a, 70-028
Szczecin, Polska
℡ +48.91.485.40.60
Honeywell Security Czech Republic
Havránkova 33, Brno
Dolní Heršpice, 619 00, Czech Republic
℡ +420.543.558.111
Honeywell Security Slovakia Republic
Vajnorskà 142, 83104 Bratislava
Slovakia
℡ +421.2.444.54.660
Maximum Power Supply Cable Length (feet/meters)
Cameras With AC/DC Power Supplies
Wire gauge
Total
load
Power
supply
24 AWG
22 AWG
18 AWG
16 AWG
High
Res
12 VDC
15 VDC
24 VAC
89/27
348/106
991/302
148/45
561/171
1601/488
374/114
1427/435
4061/1238
597/182
2273/693
6462/1970
Std Res
12 VDC
15 VDC
24 VAC
236/72
420/128
1155/352
384/117
679/207
1866/569
977/298
1729/527
4736/1444
1555/474
2752/839
7541/2299
Caution
Calculations are based on an unregulated linear
power supply, which would be the worst case. Using a regulated
or switching power supply can increase the cable distance.
Honeywell recommends using a CSA Certified/UL listed Class 2
power adapter to ensure compliance with electrical safety
standards.
Maximum Video Coaxial Cable Length (feet/meters)
Cable type
RG-59
RG-6
RG-11
Wire gauge
23 AWG* 18 AWG*
14 AWG*
Maximum length (feet/meters) 750/229
1500/457
2000/610
* Copper clad steel core, 95% braided shield
Legend
1
Camera housing
2
Tilt adjustment
bracket and
thumbnuts
3
Inner liner
4
Dome cover
5
Dome tabs (x3)
1
2
3
4
5
4.33” (110 mm)
3.
9
1
”
(
96.
3
m
m
)
3.27” (83 mm)
0.2” (5 mm)
diameter
Video Signal Specifications
Video Standard:
NTSC, PAL
NTSC, PAL
High Res
Standard Res
Scanning System:
525 lines, 2:1 interlace (NTSC)
625 lines, 2:1 interlace (PAL)
Image Sensor:
1/3” Interline Transfer CCD
Number of Pixels
(H x V):
768 x 494 (NTSC)
752 x 582 (PAL)
510 x 492 (NTSC)
500 x 582 (PAL)
Minimum
Illumination:
0.6 lux @ F1.3
0.2 lux @ F1.3
(AGC on, 50 IRE)
Horizontal
Resolution:
540 TVL
350 TVL
Video Output:
1.0 Vp-p @ 75 Ohms
S/N Ratio:
50 dB (AGC Off)
Sync System:
12 VDC: Internal, 24 VAC: Line lock
Auto Gain Control:
On/off, switchable
BLC:
On/Off, switchable
AI/AES Selection:
On/off, switchable
Automatic Electronic
Shutter:
1/60 - 1/100,000 sec (NTSC)
1/50 - 1/100,000 sec (PAL)
Lens Type:
2.8 mm to 10 mm Vari-focal Auto Iris,
F1.3
Lens Iris Control:
Direct Drive (DC) AI
Angle of View (Lens):
Wide
Tele
129.0° (D), 100.2° (H), 73.3° (V)
34.3° (D), 27.4 (H), 20.5° (V)
Focal Length:
f = 2.8 mm to 10 mm
White Balance:
ATW
Gamma:
0.45
Electrical Specifications
Input Voltage:
12 VDC/24 VAC
Input Voltage Range:
11 to 16 VDC
17 to 28 VAC
Power Consumption:
3.5 W (max)
Mechanical
Dimensions
(W x H):
4.33” x 3.91” (110 mm x 96.3 mm)
Weight:
Net
Shipping
.66 lb (.3 Kg)
1.32 lb (.6 Kg)
Construction:
Housing and dome: Polycarbonate
Environmental
Temperature:
Operating
Storage
14°F to 122°F (-10°C to 50°C)
-4°F to 140°F (-20°C to 60°C)
Relative Humidity:
0% to 90%, non-condensing
Regulatory
Emissions:
FCC, CE (EN55022)
Immunity:
CE (EN50130-4)
Safety:
UL2044
a
, EU: 73/23/EEC LVD
a
Applies only to HD3VC4SHR and
HD3VC4SA models.