Installation instructions–rcwl301a – Honeywell RCWL301A User Manual
Page 3
Installation instructions–RCWL301A
69-2139EFS—1
3
Chime Position
The Chime can be free standing or wall mounted using the wall mounting bracket
provided. If wall mounting is preferred, screw the bracket to the wall (see Fig 7). The
Chime hooks onto the wall bracket as illustrated.
RPWL3045A Wireless Converter / Extender / Push
Push/Converter functions
The bell push in this kit can be used as a
standalone wirefree push. Additionally, it can
be used to interface with an existing wired
doorbell system or any of the following:
•
A standard wired bell push
•
A lit bell push and transformer
•
A door or window contact
•
Any device with N/O or N/C, voltage free
contacts
•
Any device which generates appropriate
control signals
< 24 (AC or DC)
See typical connections (C1-7).
C2 is used for included door/window
contacts.
Important Note: Additional wiring can be brought into the push through the grommet in
the back of the push. Once the grommet has been pierced or removed, we
recommend that the push is mounted indoors.
Open the bell push/converter
Using a ball point pen press at point A shown in fig 8. Remove the cover. Undo the
retaining screw B and remove the back of the push.
Connect the push/converter/extender to the door contacts.
Fit the Push/Converter/Extender Battery
Insert the CR2032 coin cell. Ensure the face marked ‘+’ is uppermost (Fig. 9).
Program the Push/ converter/extender to the chime
•
Press the
button of the chime and keep it pressed. Each Icon will light in turn.
When the “!” Icon is lit, release the button.
•
While the Icon is lit, separate the door contacts. The chime will play the alert sound.
The Icon will flash.
Fix the door contacts to the door and door frame
M27203
Fig. 7
Typical Connection
C1
C2
C3
C4
C5
C6
C7
BELL
BELL
BELL
~
~
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
2
5
4
1
3
120V
1
2
3
4
5
120V
1
2
3
4
5
Diagram Application
Operation
C1
wired bell push or 'normally
open' switch/contacts
C2
door/window contact, 'normally
closed' switch/contacts
C3
a lit push (with transformer) when
switch is closed, chime will sound
C4
landscape push/converter -
terminal positions
C5
a typical wired bell or chime circuit -
transformer powered
C6
converter connected to a wired bell
or chime -transformer powered
C7
converter connected to a wired bell
or chime circuit - battery powered
when switch is closed,
chime will sound
when switch is opened, chime
will make an 'ALERT' sound
when switch is closed,
chime will sound
when push is operated,
chime will sound
when push is operated,
chime will sound
Fig. 8
A
B
CR2032
CR2032
Fig. 9