Removal and replacement preliminaries, 4 removal and replacement preliminaries, 1 tools required –1 4.2 service considerations –1 – HP EXPANSION BASE 344524-001 User Manual
Page 24: 1 tools required, 2 service considerations
Maintenance and Service Guide
4–1
4
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and safe
removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
5.0-mm hex socket for system board standoffs
■
Flat-bladed screwdriver
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
4.2 Service Considerations
The following sections include some of the considerations that
you should keep in mind during disassembly and assembly
procedures.
✎
As you remove each subassembly from the Expansion Base,
place the subassembly (and all accompanying screws) away from
the work area to prevent damage.