Husqvarna 141 - Manual (Page 2)

2
IDENTIFICATION (WHAT IS WHAT?)
1
4
5
6
7
8
9
10 11
12
13 14 15
16 17
18
19
20
21
22
24 23
1. Cylinder Cover
2. Front Handle
3. Front Hand Guard
4. Starter Cover
5. Chain Oil Tank
6. Starter Handle
7. Carburetor Adjusting Screw
8. Choke Control
9. Rear Handle
10. ON/OFF Stop Switch
11. Fuel Tank
12. Muffler 13. Bar Tip Sprocket
14. Saw Chain
15. Saw Bar
16. Chain Catcher
17. Chain Brake Assembly
18. Rear Hand Guard
19. Throttle Control/Trigger
20. Throttle Lock
21. Bar/Chain Adjustment Tool
22. Chain Tensioning Screw
23. Instruction Manual
24. Guide Bar Cover
3 2 1
IDENTIFICATION OF SYMBOLS
WARNING! This chain saw can be dangerous! Careless or improper
use can cause serious or even fatal injury.
Read and understand the instruction manual before using the chain saw.
Measured maximumkickback value without chain brake for the bar and
chain combination on the label.
XX_
There may be more symbols found on your unit other than those listed above. These
symbols may represent compliances, standards, or other matters concerning the product.
Sound pressure level at 15 meters (50 feet)