HandHeld Entertainment Dolphin 7850 - Manual (Page 5)

3
Step 2: Charge the Batteries
There are two types of battery power: the main
battery pack and the backup battery located inside
the terminal. The main battery pack powers the
terminal and charges the internal backup battery.
Dolphin terminals ship with both batteries discharged
of power. Charge the main battery pack for a
minimum of four hours before initial use!
You can use one of the following charging
peripherals:
• Dolphin HomeBase (shown right)
• Dolphin ChargeBase
• Dolphin QuadCharger
• Dolphin Charge/Comm Cable
• Dolphin AC Adapter Cable
Step 3: Boot the Terminal
The terminal begins booting as soon as power is applied and runs by itself. Do
NOT press any keys or interrupt the boot process.
When the boot process is complete, the Today screen appears and the terminal
is ready for use.
Resetting the Terminal
There are two ways to reset the terminal: a soft reset and a hard reset.
Soft Reset: Press and hold the Red + ESC keys for approximately
five seconds.
A soft reset restarts the terminal without erasing RAM data.
Hard Reset: Press and hold the Red + TAB keys approximately five
seconds.
A hard reset re-initializes the terminal.
User Documentation
For more information about using the Dolphin terminal, refer to the Dolphin 7850
Series User’s Guide, which can be downloaded from
www.handheld.com .
Dolphin HomeBase
! Use a Dolphin 7850 peripheral and the power cables
provided by Hand Held Products. Use of peripherals or
cables not sold/manufactured by Hand Held Products
will void the warranty and may damage the terminal.